Monday, April 28, 2014

Process Of Doing House Washing

By Heidi Carver


A house wash is done with the use of high velocity water spray. This will clean dirt and residue from the outer part of a house. This way of cleaning a place is important especially when the home owner is going to paint or repaint his home. If the surface is clean, it will allow the paint to last longer.

There are many equipments being used for this kind of cleaning. You could use the equipments for washing on most of those kinds of housing material as long as you know the steps of washing. You could check for house washing Pensacola FL whenever you like to know more of it. You could contact someone so he could do that for you. You also have the choice to do that yourself.

Pensacola has been called as the first European settlement at North America. You can find it at the state of Florida. Pensacola FL is a destination that is family friendly. You could do many activities even if you are a child or already an adult. You could also find few of the best washing services for your home in that area.

First in the process of cleaning it is selecting a washer that will be suitable for that work. There are housing materials which are capable to withstand the pressure of the water. If the material is soft, it is best to utilize a washer which has 1200 until 1500 psi as it cannot create damages on a material. If the material is strong, one should utilize a washer which has 2500 until 3000 psi. That machine can clean faster and better than others. If a person wanted to use detergent, he needs to use a washer with a built in dispenser for detergent.

If you are going to clean around a landscaped area or lights, you should cover it with cloth. You can also cover it using a plastic sheet. Secure the cover using a duct tape. This should be covered so that it will not be harmed by the pressure of water.

If there is a visible mold on a surface, you could scrub it manually. After doing that, mix 1 lb non phosphate concentrated cleaner and 4 gallons water. Mix them together and put it inside the dispenser.

Connect a hose connected to the water supply going to the washer. When it is done, turn the machine on. Test its pressure first. Hold the nozzle with both hands about three feet from the wall. Move it closer until it is strong enough to remove the dirt but not that strong enough to cause any damage.

Start cleaning from the upper areas of your house moving to the lower areas. Firmly move its nozzle from one side to another. After doing that, rinse the surface from the upper areas moving to the lower areas. Let that dry for at least two days.

This kind of cleaning a house is important most specially if an outer area of your home is having molds. The look of the home will be affected. That dirt is not good for your health too. It will be a good way to be sure that the home of a person is clean.




About the Author:



No comments: