Dry ice blasting is a special technique of blasting which utilizes carbon dioxide gas that is in solid form. In order for the gas to change to solid form, it is put under low temperature and high pressure. There are three main aspects to the cleaning process. These are sublimation, extreme temperature change and kinetic energy. When one needs Dry Ice Blasting Pittsburgh offers the perfect location to visit.
Through sublimation, the solid carbon dioxide gas is converted from solid to gaseous state without passing through the liquid state. Sublimation process is very important during the cleaning process. The process ensures there is no residue formed from the abrasive which is being used in the cleaning. Dry ice is the solid carbon dioxide that is used in form of white pellets for cleaning.
There are several reasons that make people to prefer using dry ice blasting over other forms of blasting operations. One of the reasons is that dry ice as an abrasive is a non-toxic substance that does not cause any kind of environmental pollution. The lack of environmental pollution in this material has made it to be approved for use in blasting operations in the United States by EPA.
Another advantage associated with this kind of method is that dry ice is not an abrasive material. This implies that during the cleaning process, the dry ice does not cause damages to the surface. In addition, dry ice is a non-conductive material. All this qualities coupled together, means that there is no secondary waste produced and hence can make this method more costly.
The nature of this method allows it be used in cleaning equipment while the equipment is still in use. For this reason labor, time, and costs are reduced. The method also provides high efficiency which results to increased efficiency in industrial operations. Equipment and the system should be kept clean so as to reduce the frequency and severity of failure. By doing this, system down times is also reduced.
This method is usually associated with some changes in temperature of the target surface. Mostly, there is a drop in the temperature of the target surface. However, the drop in temperature is usually low and the body can always return to room temperature after only a few minutes. The surface area of the surface that is being cleaned and the amount of dry ice used per minute usually determine temperature change observed.
Using this cleaning technique has been associated with a number of safety concerns. One of the concerns is that the pellets used in cleaning are normally propelled at a high velocity. As such, they are dangerous to animals and human beings. The general rule is to not point the gun at surfaces which are not being cleaned. Also, the gun ought not to be pointed to animals and humans.
A number of companies provide these services. It is therefore easy for one to get a company to work with in case they need one. The companies charge different prices for the work and the services offered are also different in terms of quality. Therefore, one should put in mind how experienced a company is before settling for it.
Through sublimation, the solid carbon dioxide gas is converted from solid to gaseous state without passing through the liquid state. Sublimation process is very important during the cleaning process. The process ensures there is no residue formed from the abrasive which is being used in the cleaning. Dry ice is the solid carbon dioxide that is used in form of white pellets for cleaning.
There are several reasons that make people to prefer using dry ice blasting over other forms of blasting operations. One of the reasons is that dry ice as an abrasive is a non-toxic substance that does not cause any kind of environmental pollution. The lack of environmental pollution in this material has made it to be approved for use in blasting operations in the United States by EPA.
Another advantage associated with this kind of method is that dry ice is not an abrasive material. This implies that during the cleaning process, the dry ice does not cause damages to the surface. In addition, dry ice is a non-conductive material. All this qualities coupled together, means that there is no secondary waste produced and hence can make this method more costly.
The nature of this method allows it be used in cleaning equipment while the equipment is still in use. For this reason labor, time, and costs are reduced. The method also provides high efficiency which results to increased efficiency in industrial operations. Equipment and the system should be kept clean so as to reduce the frequency and severity of failure. By doing this, system down times is also reduced.
This method is usually associated with some changes in temperature of the target surface. Mostly, there is a drop in the temperature of the target surface. However, the drop in temperature is usually low and the body can always return to room temperature after only a few minutes. The surface area of the surface that is being cleaned and the amount of dry ice used per minute usually determine temperature change observed.
Using this cleaning technique has been associated with a number of safety concerns. One of the concerns is that the pellets used in cleaning are normally propelled at a high velocity. As such, they are dangerous to animals and human beings. The general rule is to not point the gun at surfaces which are not being cleaned. Also, the gun ought not to be pointed to animals and humans.
A number of companies provide these services. It is therefore easy for one to get a company to work with in case they need one. The companies charge different prices for the work and the services offered are also different in terms of quality. Therefore, one should put in mind how experienced a company is before settling for it.
About the Author:
You can find a list of the benefits and advantages of using professional dry ice blasting Pittsburgh services at http://www.asmenvironmental.com right now.
No comments:
Post a Comment