Botanists have realized that to plant seedlings or seeds is not the only way to have plants at your home or farm, as one can also relocate a plant form one location to another. The process of Growing Cycads is thus considered less appropriate than relocating them either for commercial or conservation purposes. Below is the process of relocating the plants.
Before the relocation, the first step involves removing the leaves at the bottom of a tree which are usually the older ones. This is done so as to reduce the effort required from the roots after moving to a new space to supply the many leaves with essential nutrients. The person relocating the plant will also need to note the directional orientation of the leaves and mark them to adjust position when moved.
The investor is required to measure the diameter of the tree caudex. The caudex refers to the tree branch or stem that stores water for future use. The diameter of the caudex is then used to dig out the tree. That is a circular channel of 3-4 times bigger diameter than that of the caudex is dug around the trees. The same 3-4 times bigger diameter is also used in digging downwards to remove the under roots.
If the holes are properly dug, then the process of removing the tree will be easier when pulling it. However, the investors need to be extra cautious when removing the tree so as to avoid damaging the roots as this may lengthen its recovery time. Additionally, the extra weight of plants due to soil on the roots is also removed by hosing.
After pulling out the trees, a close examination of all roots should be carried out. This is done to evaluate the damage to the roots as well as to cut of ragged roots; the ragged roots are mainly attached to the root ball. On cutting them off, fungicide and rooting hormones are applied on the tips to promote their regrowth so as to adapt to the new area as well as avoid further root damage.
The plant is the relocated to a new location using a machine and vehicle either to be plotted or boxed. Extra care during transportation should be done to avoid additional root damage. For those who want to plant the vegetation in a new location, they need to find an area with a sloppy nature. Additionally, the soils need to have a good drainage system. Thus sandy soils are a common choice.
In the new location, a hole with the diameter 1 and half more than that of a root ball diameter is dug. The 1 and a half more measurement is also used to dig the deepness of the hole. The directional orientation of the leaves is then noted to guide those placing the tree into the hole. The depth of soil to the plant should also be similar to that in the original location to reduce the plant stress.
A trench is then dug around it on which 5 gallons of water mixed with rooting hormone is added to supply the plant for two to three weeks. The first leaves produced by the tree may be very different from those produced in the original location example color and size, however, with time the plant will adapt and become healthier.
Before the relocation, the first step involves removing the leaves at the bottom of a tree which are usually the older ones. This is done so as to reduce the effort required from the roots after moving to a new space to supply the many leaves with essential nutrients. The person relocating the plant will also need to note the directional orientation of the leaves and mark them to adjust position when moved.
The investor is required to measure the diameter of the tree caudex. The caudex refers to the tree branch or stem that stores water for future use. The diameter of the caudex is then used to dig out the tree. That is a circular channel of 3-4 times bigger diameter than that of the caudex is dug around the trees. The same 3-4 times bigger diameter is also used in digging downwards to remove the under roots.
If the holes are properly dug, then the process of removing the tree will be easier when pulling it. However, the investors need to be extra cautious when removing the tree so as to avoid damaging the roots as this may lengthen its recovery time. Additionally, the extra weight of plants due to soil on the roots is also removed by hosing.
After pulling out the trees, a close examination of all roots should be carried out. This is done to evaluate the damage to the roots as well as to cut of ragged roots; the ragged roots are mainly attached to the root ball. On cutting them off, fungicide and rooting hormones are applied on the tips to promote their regrowth so as to adapt to the new area as well as avoid further root damage.
The plant is the relocated to a new location using a machine and vehicle either to be plotted or boxed. Extra care during transportation should be done to avoid additional root damage. For those who want to plant the vegetation in a new location, they need to find an area with a sloppy nature. Additionally, the soils need to have a good drainage system. Thus sandy soils are a common choice.
In the new location, a hole with the diameter 1 and half more than that of a root ball diameter is dug. The 1 and a half more measurement is also used to dig the deepness of the hole. The directional orientation of the leaves is then noted to guide those placing the tree into the hole. The depth of soil to the plant should also be similar to that in the original location to reduce the plant stress.
A trench is then dug around it on which 5 gallons of water mixed with rooting hormone is added to supply the plant for two to three weeks. The first leaves produced by the tree may be very different from those produced in the original location example color and size, however, with time the plant will adapt and become healthier.
About the Author:
When you are looking for information about growing cycads, go to our web pages online here today. More details are available at http://stores.botanicwonders.com/cycads now.
No comments:
Post a Comment